Zubehör
Lithoprotect® Squeegee DXRA100 with felt edge GENERAL INFORMATION The universal Squeegee DXRA100 is the perfect assistant for all related mounting jobs and bonds of self-adhesive films of all kinds. The plastic squeegee with felt DX100 is particularly flexible and transmits the pressure during bonding ideal to the film. A felt edge ensures that the film is not damaged or scratched during bonding. MAIN FEATURES Very stable Extremely flexible Special felt with high durability and abrasion protection Felt edge prevents scratching of the Foil No discoloration of the surface in dry and wet application FURTHER INFORMATION Technical Datasheet: Technical Data Sheet Squeegee DXRA100 english Technisches Datenblatt Kunststoffrakel DX100 deutsch Application Note: Installation Instruction english Montageanleitung deutsch Maintenance Instruction english Pflegehinweis deutsch Installation Instruction Video Montageanleitung Video NOTE: All data and information relate to the best of our knowledge and are based on measurement and experience. It remains in your responsibility to check the suitability of our yellow foil for the intended use of it. Our products are regularly quality-tested and further developed. We therefore reserve the right to adjust without additional information, the chemical composition or physical characteristics of new knowledge.
Lithoprotect® Seam Tape YST520 GENERAL INFORMATION The seam tape YST520 is made of the same material as the self-adhesive UV-protection foil YSA520. For this reason, all data and properties for the UV-protective foil also apply to the seam tape. The yellow light products were specially developed for UV-photo-sensitive applications and blocks UV-radiation below 520 nm. The seam tape consists of yellow-dyed cellulose triacetate and is coated on one side with a permanent dispersion glue so it can be laminated on all solid interior surfaces. MAIN FEATURES Blocks wavelengths below 520 nm Outstanding optical purity High adhesion Long-term UV-stable High inherent scratch resistivity TECHNICAL DATA Bond strength immediately: ~ 7.5 N / 25 mm Bond strength after 7 days: ~ 15 N / 25 mm Adhesive: Acrylic-dispersion adhesive Cover: PE cover, red plaid in 10 mm grid Width: 10,2 mm Length: 50 m Temperature range during application: 15 °C Temperature range: -30 °C to +80 °C Installation: Indoor CHEMICAL CHARACTERISTICS The laminated seam tape YST520 is waterproof and resistant to most oils and greases, gasoline and aliphatic hydrocarbons. The surface of the yellow film is partially dissolved or swollen by hydrochlorofluorocarbons, ketones or aromatic solvents, which can affect the optical properties. TRANSMISSION The transmission characteristics of our seam tape YST520 are very close to our former yellow foil Y520, and were specially adapted to the stringent quality requirements in the area of the yellow rooms in photolithography and micro-electronics industry. According to the semi-logarithmic graph shown below, the transmission at 450 nm is about 0.0001 %, which means that it has decayed to a millionth of a part at this wavelength. If you compare our film with other “yellow” foils, we recommend to ask for a semi-logarithmic transmission plot. Semi-Logarithmic Transmission Linear Transmission The transmission spectrum is not to be understood as a specification, but as an exemplary measurement on a Lot. FIRE BEHAVIOR The laminated seam tape YST520 is self-extinguishing. STORAGE Under proper storage conditions of 5 - 25 °C and a relative humidity of 30 - 60%, the seam tape YST520 has a shelf life of up to one year. PROCESSING If the surface to be covered with yellow foil is broader than the roll (which has a width of 115 cm), you can stitch two pieces of foil side by side and cover the abutting ends with our special seam tape. With the seam tape YST520 you can be sure, that no UV-light will tunnel into your room. This seam tape you can use as well for covering the edges between the foil and the window frame. The yellow foil YSA520 can be glued with our mounting fluid DXMF301 easily and bubble-free on any smooth and solid surfaces. Detailed information is available in our assembly instructions for self-adhesive UV-protection film yellow YSA520. For filtering fluorescent tubes, we recommend our specially designed polycarbonate sleeves. Here, our UV protective film Yellow Y520 is already incorporated, so you can cost-effectively “upgrade” standard white fluorescent tubes for your yellow light application. FURTHER INFORMATION Technical Datasheet: Technical Data Sheet Seam Tape YST520 english Technisches Datenblatt Nahtband YST520 deutsch Application Note: Installation Instruction english Montageanleitung deutsch Installation Instruction Video Montageanleitung Video NOTE: All data and information relate to the best of our knowledge and are based on measurement and experience. It remains in your responsibility to check the suitability of our yellow foil for the intended use of it. Our products are regularly quality-tested and further developed. We therefore reserve the right to adjust without additional information, the chemical composition or physical characteristics of new knowledge.
Lithoprotect® Assembly Fluid DXMF301 GENERAL INFORMATION Mounting fluid DXMF301 for an efficient wet bonding of self-adhesive foils. DXMF301 is ready-to-use and optimized for our self-adhesive UV-protection yellow foil YSA520. MAIN FEATURES Fast and easy bonding of self-adhesive foils such as our yellow foil YSA520. The foil keeps repositionable during bonding for a while Leaves no visible or interfering residues Allows a strong final bonding of the foil to the window CHEMICAL CHARACTERISTICS A nonflammable aqueous solution of anionic and nonionic surfactants and alcohols. No labeling requirement. A Material Safety Data Sheet according to EU regulations is available. FIRST AID In case of contact with the eye, rinse thoroughly with cold water. PROCESSING Clean the surface (window) thoroughly and spray evenly with the mounting fluid DXMF301. Attach the self-adhesive foil to be bonded with the adhesive on the still moist surface, squeeze the excess liquid thoroughly from the gap between foil and window (a suitable squeegee with felt insert is also available from us). Wipe away remains of assembly fluid DX MF 301 with a soft, absorbent cloth. A possible whitening of the film vanishes depending on temperature and room humidity within a few days. FURTHER INFORMATION Safety Datasheet: Safety Data Sheet Assembly Fluid DXMF301 english Sicherheitsdatenblatt Montageflüssigkeit DXMF301 deutsch Technical Datasheet: Technical Data Sheet Assembly Fluid DXMF301 english Technisches Datenblatt Montageflüssigkeit DXMF301 deutsch Application Note: Installation Instruction english Montageanleitung deutsch Maintenance Instruction english Pflegehinweis deutsch Installation Instruction Video Montageanleitung Video NOTE: All data and information relate to the best of our knowledge and are based on measurement and experience. It remains in your responsibility to check the suitability of our yellow foil for the intended use of it. Our products are regularly quality-tested and further developed. We therefore reserve the right to adjust without additional information, the chemical composition or physical characteristics of new knowledge.